Antibodies

View as table Download

Canine IgG (H+L chain) goat polyclonal antibody, FITC

Applications Can be used to identify and measure IgG, antigen or antibody, at the cellular and subcellular level by immunofluorescence staining of appropriately treated cell and tissue substrates, and to demonstrate circulating antibodies in serodiagnostic microbiology and autoimmune diseases; to identify a specific antigen or immune complex using a reference antibody of dog origin in the middle layer of the indirect test procedure. This immunoconjugate is not pre-diluted. The optimum working dilution of each conjugate should be established by titration before being used. Excess labelled antibody must be avoided because it may cause high unspecific background staining and interfere with the specific signal.
Working dilutions are usually between 1/20 and 1/120.
Reactivities Canine
Conjugation FITC

Canine IgM (Fc specific) goat polyclonal antibody, FITC

Applications Can be used in Immunocytochemical and Immunohistochemical staining of IgM at the cellular and subcellular level of appropriately treated cell and tissue substrates; to demonstrate circulating IgM antibodies in serodiagnostic microbiology and autoimmune diseases; to identify a specific antigen using a reference antibody of dog origin known to be of the IgM isotype in the middle layer of the indirect test procedure. This immunoconjugate is not pre-diluted. The optimum working dilution of each conjugate should be established by titration before being used. Excess labelled antibody must be avoided because it may cause high unspecific background staining and interfere with the specific signal.
General Recommended Dilutions: are usually between 1/10 and 1/40, depending on the method used.
Reactivities Canine
Conjugation FITC

BCL2 sheep polyclonal antibody, Purified

Applications IF, IP, WB
Reactivities Canine, Human, Rat
Conjugation Unconjugated

Cytochrome C (CYCS) sheep polyclonal antibody, Purified

Applications IHC, IP, WB
Reactivities Canine, Human, Rabbit, Rat
Conjugation Unconjugated

Canine IgA (Fc specific) goat polyclonal antibody, Azide Free

Applications Can be used as unlabelled primary or secondary reagent for indirect detection techniques, to prepare conjugates with markers of the user’s own choice, to prepare an insoluble immunoaffinity adsorbent or a solid phase antibody reagent by coupling to an artificial carrier and as catching or detection antibody in non-isotopic methodology and solid phase immunochemistry. When applied in any cytochemical or histochemical procedure or solids phase coupling technique, the optimum concentration of the IgG preparation should always be established by titration.
Typical working dilutions:
In histochemistry are usually between 1/50 and 1/250.
In ELISA and comparable non-precipitating antibody-binding assays between 1/500 and 1/2000.
Reactivities Canine
Conjugation Unconjugated

Canine IgG (Fc specific) goat polyclonal antibody, Azide Free

Applications Can be used as unlabelled primary or secondary reagent for indirect detection of IgG at the cellular and subcellular level by staining of appropriately treated cell and tissue substrates; to prepare conjugates of the user’s own choice; to prepare an insoluble immunoaffinity adsorbent or a solid phase antibody reagent by coupling to an artificial carrier and as catching antibody in non-isotopic methodology and solid phase immunochemistry. When applied in any cytochemical or histochemical staining procedure or solid phase coupling technique, the optimum concentration of the IgG preparation should be established by titration before being used.
Typical working dilutions:
In histochemistry are usually between 1/50 and 1/250.
In ELISA and comparable non-precipitating antibody-binding assays between 1/1000 and 1/5000.
Reactivities Canine
Conjugation Unconjugated

Canine IgM (Fc specific) goat polyclonal antibody, Azide Free

Applications As unlabelled primary or secondary reagent for indirect detection techniques, to prepare conjugates with markers of the user’s own choice, to prepare an insoluble immunoaffinity adsorbent or a solid phase antibody reagent by coupling to an artificial carrier and as catching or detection antibody in non-isotopic methodology and solid phase immunochemistry. When applied in any cytochemical or histochemical procedure or solids phase coupling technique, the optimum concentration of the IgG preparation should always be established by titration.
Typical working dilutions:
In histochemistry are usually between 1/50 and 1/250.
In ELISA and comparable non-precipitating antibody-binding assays between 1/500 and 1/3000.
Reactivities Canine
Conjugation Unconjugated

Complement C3 (C3) goat polyclonal antibody, FITC

Applications ID, IP
Reactivities Canine
Conjugation FITC

Fibrinogen goat polyclonal antibody, Azide Free

Applications ID, IP
Reactivities Canine
Conjugation Unconjugated

Canine IgA (Fc specific) goat polyclonal antibody, Biotin

Applications Can be used in immunocytochemical and immunohistochemical staining of IgA at the cellular and subcellular level of appropriately treated cell and tissue substrates; to demonstrate circulating IgA antibodies in serodiagnostic microbiology and autoimmune diseases; to identify a specific antigen using a reference antibody of dog origin known to be of the IgA isotype in the middle layer of the indirect test procedure; in non-isotopic assay methodology (e.g. ELISA) to measure IgA in dog serum or other body fluids. As a second step an avidin or streptavidin conjugate of the user’s choice has to be used. Antisera to IgA do not discriminate between serum IgA (monomeric and dimeric) and higher molecular forms such as secretory IgA. This immunoconjugate is not pre-diluted. The optimum working dilution of each conjugate should be established by titration before being used. Excess labelled antibody must be avoided because it may cause high unspecific background staining and interfere with the specific signal.
Working dilutions:
For histochemical and cytochemical use are usually between 1/100 and 1/500.
In ELISA and comparable non-precipitating antibody-binding assays between 1/1000 and 1/5000.
Reactivities Canine
Conjugation Biotin

Canine IgG (Fc specific) goat polyclonal antibody, Biotin

Applications Can be used in immunocytochemical and immunohistochemical use for the detection of IgG at the cellular and subcellular level by staining of appropriately treated cell and tissue substrates; to demonstrate circulating IgG antibodies in serodiagnostic microbiology and autoimmune diseases; to identify a specific antigen using an reference antibody of goat origin known to be of the IgG isotype in the middle layer of the indirect test procedure; in non-isotopic assay methodology (e.g. ELISA) to measure IgG in dog serum or other body fluids. As a second step an avidin or streptavidin conjugate of the user’s choice has to be used. This immunoconjugate is not pre-diluted. The optimum working dilution of each conjugate should be established by titration before being used. Excess labelled antibody must be avoided because it may cause high unspecific background staining and interfere with the specific signal.
Working dilutions:
For histochemical and cytochemical use are usually between 1/100 and 1/250.
In ELISA and comparable non-precipitating antibody-binding assays between 1/500 and 1/5000.
Reactivities Canine
Conjugation Biotin

Canine IgM (Fc specific) goat polyclonal antibody, Biotin

Applications Can be used in immunocytochemical and immunohistochemical use for the detection of IgM at the cellular and subcellular level by staining of appropriately treated cell and tissue substrates; to demonstrate circulating IgM antibodies in serodiagnostic microbiology and autoimmune diseases; to identify a specific antigen using an reference antibody of goat origin known to be of the IgM isotype in the middle layer of the indirect test procedure; in non-isotopic assay methodology (e.g. ELISA) to measure IgM in dog serum or other body fluids. As a second step an avidin or streptavidin conjugate of the user’s choice has to be used. This immunoconjugate is not pre-diluted. The optimum working dilution of each conjugate should be established by titration before being used. Excess labelled antibody must be avoided because it may cause high unspecific background staining and interfere with the specific signal.
Working dilutions:
For histochemical and cytochemical use are usually between 1/100 and 1/250.
In ELISA and comparable non-precipitating antibody-binding assays between 1/1000 and 1/4000.
Reactivities Canine
Conjugation Biotin