Home Support FAQs TrueClones FAQs|
1. Q: What is a TrueClone?
A: OriGeneÆs TrueClones are untagged cDNA clones with native stop codons. All clones are assessed for the completeness of the open reading frame only and with respect to the associated reference. The majority of TrueClones are in the pCMV6-XL4/XL5/XL6 vectors for transient overexpression in mammalian cells. Any of our TrueClones can be provided in a vector for stable over-expression (pCMV6-Neo) for a nominal fee.
2. Q: What is the difference between a TrueClone and a TrueORF?
A: TrueORFs are much more "engineered" than TrueClones. TrueORF inserts are just the coding sequence (Open Reading Frame aka ORF) in our pCMV6-Entry Precision Shuttle vector, designed to put C-terminal Myc-DDK tags on the expressed protein. TrueORFs do not contain any UTR sequences (these would interfere with making the fusion protein) but can be used for transient or stable overexpression in mammalian cells. The Open Reading Frame in any TrueORF can be easily shuttled to another destination vector adding various tags or functions.
3. Q: Is it better to purchase a TrueClone or a TrueORF?
A: It really depends on the purpose of your experiments. For example, if you simply need to overexpress the protein under transient conditions, move the cDNA to your own vector, or use the clone as a template for PCR, then the TrueClone is a good choice. If you donÆt have a good antibody against your protein, need to easily purify your protein, or you need to make stable cell lines, the TrueORF is a good choice.
4. Q: How do I search for my cDNA clone?
A: The most precise search of our website is by using the NCBI reference accession number of the mRNA transcript (e.g. NM_000123). This will bring up all products related to this reference sequence including TrueClone, ORF clone, antigen standard, and HuSH silencing kit. If you donÆt know the NCBI reference accession number, use the gene symbol to search. This will often generate many more hits than expected because it is a simple text search that may return many splice variants and occasionally unwanted transcripts. If you get too many positives, we recommend that you search Entrez Gene from NCBI to find the reference accession number and then repeat the search of OriGeneÆs website with the accession number. Go to http://www.ncbi.nlm.nih.gov/ and select gene from the dropdown menu on the left of the search box.
5. Q: How do I know the cloning sites and/or sequence of my TrueClone?
A: The majority of TrueClones were inserted into the pCMV6-XL4/XL5/XL6 vectors using a linker-based strategy. The linkers were ligated to the EcoRI (5`) and Sal I (3`) sites of the corresponding pCMV6-XL vector. For the 3` site, a Xho I linker was fused to the Sal I site, destroying both Xho I and Sal I in the process. These sites were not used for TrueClones in the pCMV6-AC vector (see pCMV6-AC vector map on the OriGene website). If you need information on the cloning sites for an AC-vector, please contact our Technical Support Team.
6. Q: Are the cloning sites for pCMV6-AC EcoRI and Sal I?
A: No. Inserts were subcloned into the pCMV6-AC vector using various combinations of restriction enzymes appropriate to each specific cDNA. Please contact OriGene technical support for information on your specific construct.
7. Q: Are OriGeneÆs clones fully sequenced?
A: For all TrueClones, OriGene posts the available sequence data on our website in each specific clone data table (sometimes, it is necessary to access a separate ôDetails and Pricingö page). 5Æ or 3Æ Read Nucleotide Sequence refers to an unedited sequence primed with a vector primer from the corresponding insert end. Sequence errors are likely to be present and therefore these reads should not be used for base-by-base analysis. Should the Open Reading Frame be covered by edited sequence, it is indicated by a link called ôEdited Nucelotide Sequenceö. All TrueORF clone inserts are fully sequenced. Always note that the exact sequence of an OriGene clone may differ from the NCBI reference with respect to biological polymorphisms.
8. Q: I received three tubes with my clone, what are they?
A: OriGene provides the full-length cDNA clone plus the VP1.5 (forward) and XL39 (reverse) vector sequencing primers. Should you need to amplify the plasmid DNA, we recommend that you end sequence with the VP1.5 (5Æ) primer.
9. Q: Can I use VP1.5 and XL39 for PCR amplication of my insert?
A: VP1.5, 5Æ GGACTTTCCAAAATGTCG 3Æ Tm=51C and XL39, 5Æ ATTAGGACAAGGCTGGTGGG 3Æ Tm=60C usually do not work well for amplification of the insert due to the large difference in their Tms. VP1.5 and XL39 are provided so that if you amplify the plasmid DNA, you can confirm your DNA prep by sequencing.
10. Q: My VP1.5 sequence read matches the reference but my XL39 shows no BLAST similarity to anything?
A: Because most of OriGeneÆs TrueClones contain a polyA tail, the XL39 primer can fail to read through this region accurately. In these instances, we recommend sequencing with a gene-specific forward primer to get a good 3` read. It is also possible that OriGeneÆs clone has a longer UTR than was present in the reference.
11. Q: I cannot detect any biological activity after transfecting my clone. What do I do?
A: Lack of activity can occur for a wide variety of causes. First, be sure that the preparation of DNA that you are working with is of the expected concentration and is not a purified contaminant (from your lab or from OriGene). Secondly, check to see if your protein is being expressed in your cell type by Western blot. If it is not, next check for expression of the mRNA transcript by RT-PCR. These are very different problems with very different solutions. Once you know the source of the problem, please contact our technical support scientists for assistance at 888-267-4436 (USA) or firstname.lastname@example.org.
12. Q: How can I release my insert?
A: In most cases, you can use Not I to liberate the complete insert. There are two Not I sites outside of the cloning sites in all pCMV6-XL vectors. Although it is very rare for the 8-base cutter, Not I, to cut inside a mammalian gene, it is important to verify this before employing this strategy. TrueClone inserts in pCMV6-AC can not be released using this strategy.
13. Q: Can I use my TrueClone for in vitro transcription and translation?
A: Yes, we have tested our TrueClones for IVTT in rabbit reticulocyte lysate systems and have seen protein production. However, if your clone is in the XL4 vector, it is necessary to liberate the insert and the sense T7 promoter from the vector.
14. Q: I need to cite your product for a paper I am writing. What language should I use?
A: We recommend that you refer to the product by its specific catalog number and refer to us as OriGene Technologies (Rockville, MD). Furthermore, we'd love to hear from you when your paper is published. Inform us and we will send a gift.